Zip HydroTap Design Range CELSIUS All-In-One Boiling, Chilled & Sparkling Filtered water, plus Hot and Cold washing up water from a single tap (hot and cold water supply required). The system features a single under bench command centre including full colour interactive touch screen display with pin code protection and customisable settings including boiling water safety mode, 3 energy saving modes including ON/OFF timers and 2 hour sleep mode, 'Quiet' mode with automated intelligent fan speed adjustment, antimicrobial protection impregnated into key water paths for enhanced hygiene, 100% water efficient air cooled technology, 0.2 micron water filtration, and 2 disposable CO2 cylinders.
Installation and connection of your Zip HydroTap must be carried out by a qualified person, observing national and local regulations.
You will require suitable mains electrical and drinking water connections, plus waste water drainage all within 1.5 metres of the product.
Discrete cabinetry cut outs are required for airflow. 40mm minimum clearance on cupboard base overhang required otherwise alternative installation options are available.
Installation on most bench tops is straightforward however some stone bench tops may require a specialised cutting service.
If you live in a hard water area, we recommend installation of a Zip scale filtration kit.
Zip HydroTap Design Range CELSIUS All-In-One Boiling, Chilled & Sparkling Filtered water, plus Hot and Cold washing up water from a single tap (hot and cold water supply required). The system features a single under bench command centre including full colour interactive touch screen display with pin code protection and customisable settings including boiling water safety mode, 3 energy saving modes including ON/OFF timers and 2 hour sleep mode, 'Quiet' mode with automated intelligent fan speed adjustment, antimicrobial protection impregnated into key water paths for enhanced hygiene, 100% water efficient air cooled technology, 0.2 micron water filtration, and 2 disposable CO2 cylinders.
Installation and connection of your Zip HydroTap must be carried out by a qualified person, observing national and local regulations.
You will require suitable mains electrical and drinking water connections, plus waste water drainage all within 1.5 metres of the product.
Discrete cabinetry cut outs are required for airflow. 40mm minimum clearance on cupboard base overhang required otherwise alternative installation options are available.
Installation on most bench tops is straightforward however some stone bench tops may require a specialised cutting service.
If you live in a hard water area, we recommend installation of a Zip scale filtration kit.